Pages

Defects of fermented milks

The sensory defects of fermented milks may be divided into the following groups:
  •  Defects resulting in changes of appearance,
  •  Defects of flavour and aroma
  •  Defects of consistency, body and texture, and viscosity.

The defects of dahi and yoghurt are discussed here:

i. Defects resulting in changes of appearance

The most important defects affecting the appearance of yoghurt are presented here under:

Natural Yoghurt

Defect

Cause of Defect
Settled, whey separation
Separation of whey due to over acidification/
mechanical shaking of gel/ low solids content/
admixture of air in stored yoghurt.
Fermented
Contamination by yeasts and coliform
organisms
Unclean appearance
Mud particles, dirt, etc.
Formation of colonies or film on the surface
Growth of yeasts or moulds

Aged, not fresh appearance
Formation of film on the surface due to drying
up crystal structures on the surface due to
freezing/ packages smeared over/ packages
damaged/ lacking care during transport
Cream line
None or insufficient homogenization
Condensed water inside of lid of package
Great fluctuations in temperatures and air
pressure

Additional Defects for Fruit- and Flavoured Yoghurts

Atypical colour
Addition of fruit juice for colouring or artificial
fruit colouring
Pale colour
Discolouration of fruit colour due to heating/
too pale colour of flavouring and fruit base
Un-homogenous appearance
Insufficient stirring/ fault during stirring

ii. Defects of Flavour and Aroma

The most important defects affecting the flavour and aroma of yoghurt are presented
here under:

Natural Yoghurt

Defect
Cause of Defect
Feed
Feed flavour of raw milk
Bitter
Too long storage of yoghurt/ high proteolytic
activity of cultures/ growth of proteolytic contaminants
Burnt (cooked)
Too severe heat treatment of the milk
Unclean sour

Cultures contaminated by wild lactic acid
bacteria, coliform organisms, etc.
Yeast, fruit
Contamination by yeasts
Stale, empty (no aroma)
One-sided growth of the streptococci/ too
short time for fermentation or too low
temperature of incubation/ low aroma
production/ low total solids content of the milk/
too strong slime production.
Mealy, gluey
Excessive addition of milk powder/ too high
evaporation
Cheesy
Contamination by proteolytic organisms (e.g.
moulds)
Oxidized flavour
Effect of light, Metal catalysator, Oxidized
flavour spontaneously occurring after 1-2
days of cold storage (without the effect of light
and metal traces).
High acid (over-sour)
Too high acidification during incubation and
after that
Low acid
Too low acidification during incubation/
inhibitory substances present in milk/
bacteriophage attacking the yoghurt culture.

Additional Defects for Fruit- and Flavoured Yoghurts

Artificial flavour

The use of too high concentrations of fruit base
and flavours/ artificial flavours.
Too sweet
Excessive addition of sugar
Atypical, flat
Addition of foreign stuffs affecting flavour/
blunting the fruit acids by neutralization/ sever
heat treatment of the fruit base and flavouring
concentrate/ faults in the manufacture of fruit
concentrate.

iii. Defects of consistency and viscosity

The most important defects affecting the consistency and viscosity of yoghurt are presented here under:

Defects in the consistency of Set Yoghurt

Defect
Cause of Defect
Whey separation, settled
High acidification of yoghurt before cooling/
containers too early moved/ insufficient
cooling/ strong acid producing cultures/ low
heating temperature of the milk.
Soupy, soft
Low protein content of the milk/ too small
inoculum of culture/ short time of incubation/
mechanical shaking of the gel before the
completed coagulation.
Spitted, cleavage
Splitting of a spherical segment of the gel due
to mechanical shaking.



Defects in the Viscosity of Stirred Yoghurt

Sandy
Contraction of the gel particles: Severe heating
of the milk/ homogenization of the milk at too
high temperature-pressure combination/ too
much evaporation of the milk/ excessive
addition of milk powder and/ or uneven stirring/
shaking during incubation i.e. too early moving
yoghurt from the production line/ stirring the
gel above 38oC, followed by holding above
38oC.
Slimy
Slime-producing contaminants/ slime
production by yoghurt culture/ addition of
slime-producing strains of yoghurt culture/ too
low temperature of incubation of the yoghurt
culture.
Gummy, gluey, tough
The use of unsuitable stabilizers/ high
quantities of added stabilizers/ faulty
incorporation of stabilizers.
Phase separation on containers (below whey, above gel)
Admixture of air: strong cooling/ pumps;
stirring
Liquid
Too strong stirring the gel/ low solids content
of yoghurt/ insufficiently concentrated flavours
and fruit base, insufficiently cooled/ short time
of cold storage/ culture of low slime
production.




iv. Common Defects in Dahi

Defect
Cause of Defect
Green/ yoghurt flavour
Acetaldehyde accumulation
Oxidized flavour

Copper contamination and/ or exposure to
fluorescent light or sunlight.
Yeasty/ Cheesy
Contaminating yeast growth
Rancid
High lipolytic activity
Insufficient flavour
Poor quality starter, low citrate level in milk
Acidic/ sour.
Excessive level of starter culture
Weak body

Insufficient heat treatment of the mix, milk
SNF too low.
Grainy texture
Acidity too high, skim milk powder not
properly stabilized.
Chalky/ powdery texture

Excess amount of skim milk powder, poor
quality of powder.
Wheying off
Excessive acidity development


No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

 

Most Reading