The sensory
evaluation of milk powders assumes great significance in our country. Milk
powders, particularly skim milk powder (SMP) is manufactured in large quantities
at feeder balancing plants in the flush season and subsequently used in lean
period in reconstituted form to maintain milk supply. Also it has become an important
export commodity. In this chapter we shall discuss the sensory evaluation of
both, whole milk powder (WMP) and Skim Milk Powder SMP.
i.
Desirable Attributes and Defects in Milk Powders
i) WMP: The flavour of dry
whole milk should be clean, rich, sweet and pleasant.Frequently, dry milk may
be unduly criticized as having a heated ‘or a ‘cooked’ taste. This may be
expected or even desired. The common flavour defects of WMP are
oxidized/tallowy, chalky, scorched, rancid and stale. The product should be
free flowing to some extent with absence of lumps. Presence of hard lumps is a
serious defect in WMP. The colour of WMP depending on the source of fat varies
from white to deep yellow. The defects such as scorched particles, browning or
lack of uniformity should be absent.
ii) SMP: The flavour of good
quality SMP, when reconstituted should be similar to that of fresh skim milk,
that is, normally a flat taste because of practically no fat in it. Otherwise,
the flavour is clean, sweet and pleasant and may have a slightly cooked or
heated perception. The chief flavour defects of SMP are stale/storage,
neutralizer and scorched. SMP prepared by spray process is very fine in particle
size and free flowing. The product pours readily somewhat like that of corn
meal. Cake formation is the most frequently occurring defect related to texture
of SMP. Sometime the defect is so serious that the product looks as hard as a
rock. The colour of SMP should be uniform and showing complete absence of
scorched particles and browning. The product should have a creamy white or
light yellow colour.
iii.
Score Card of Milk Powders
The weightage given
to different attributes of milk powders is shown in table .
Score card for milk powders |
iii.
Scoring Technique of Milk Powders
i) Method of Reconstitution: Generally
the dry milks are reconstituted to the composition of their native liquid form
for examining odour, taste and presence of undissolved particles (sediments).
The required quantities of WMP (13 g) and SMP (10g) are dissolved in warm water
(40-45oC) to make the final volume to 100 ml and left for about 30 min
before judging.
ii)
Sequence of Observations
a) First of all
observe the external condition of the package for cleanliness, neatness etc.
b) Open the package
and immediately inhale the aroma. Take a small amount of powder in to mouth for
taste and tactual perceptions.
c) Simultaneously
observe the appearance of powder for colour, lack of lumps/ cakes and free
flowing properties.
d) Then start
judging the reconstituted milk adopting the same technique as discussed easier
for fluid milk.
e) Try to correlate
the flavour perceived in dry form with that noted in reconstituted form.
f) Record all
observations along with intensity of defect, if any, in the score sheet.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.